7.25" NZR Da

Finally the NZR Da arrives on the 7.25" railway after 1 year since I first got it. I built a shed for it and increased the radius of the top horseshoe loop. No issues with the track to report, and a quick video of it having a run.

7.25" Gauge Engine shed expansion continued

 Continuing on with the shed build, One night I was on Temu and found this item "A Set of 100pcs of 3D Brick Wall Decals, Made of Foam with Self-Adhesive Backing, Designed to Be Waterproof And Resistant to Moisture" and figured I could use em. The advert had images that looked nothing like what I expected but this would be a good use for em. I'm not entirely sure they are outdoor suitable but if I seal em with paint it should hold up ok. I had a sheet up externally as a test for a few weeks now and feel a bit more confident with my scheme.

Applying "fake bricks" texture.Very different to whats advertised!

Still needing to apply filler to the door area, painting everything white, then will go over & paint the bricks or mortar.

The inside view, the track is made up of equal angle iron 20x20x3mm. 

7.25" Gauge Engine shed expansion

Its been a bit since the last post and figured autumn is a good time. The engine shed has been somewhat expanded, I started with removing the triangle at the top thanks to the better, far flatter triangle at the bottom of the layout. Then adding 2 turnouts and sidings. The framework was simple but strong enough for the job. The theme is based on the French Foreign Legion Fort used in campaigns across North Africa. Could come in handy in case of WWIII and its reinforced with 7mm of external plywood AND a special formula Temu bullet proof paint the fancy talking AI salesman said! 

A few years earlier, laying 7.25" gauge 

Track being the important stuff first, then just plop the model shed down.

Framing in place.

Pond slowly draining, pond wall needs moving in a bit and retaining wall built.

Both door frames in place, putty & paint applied

One day soon a 4 loco lineup might be possible. Tunnel for the G gauge layout incorporated, the missing section sits in place to allow running but I plan on altering the layout in the future.

Doors coming together,going to further dress the doors with decking timber placed vertically.First plank fixed in place in the middle.

Today saw Dad & Daisy following my brother David & his Daughter pass the "town". Never seem to see the climax stuck behind anything..