This time around sees the Nzr C shunter designed & printed in 1:24 scale. Since the wheelbase is perfect for the LGB chassis the old man has acquired.
 |
| both printers working overtime, as Ive been sanding down the sections, the dust tends to build in the gaps/section joins, so i've been carefully applying glue over the dust/powder in the gaps, and sanding when dry & repeating the process untill gaps filled. |
At this point most of the basic components are printed except the obvious, none of the real detailing has started yet but the platform is there. I think a few more sand downs & repaints in a few areas, boiler & roof areas. but before that I need to restock with putty, as my trick with gluing the sanding powder didn't really work out.
I also need to rework the return crank, and re attach the eccentric.
Another area of interest is the framework below the cab, if I were to make it prototypical, then the delta trucks going to cause issues on the first sharp curve, so I may fudge the downward angled part of the frame a bit.
Currently researching the Wf, which really has an awfully lot in common.
Another area of interest is the framework below the cab, if I were to make it prototypical, then the delta trucks going to cause issues on the first sharp curve, so I may fudge the downward angled part of the frame a bit.
Currently researching the Wf, which really has an awfully lot in common.
