Saturday 6 December 2014

NZ120 Couplers

Some more work on the couplers for nz120 has resulted in couplers that will hopefully be printable in brass..
The previous test prints in brass were quite successfull all round, some work drilling out the holes with a 0.9mm drill is required however.

"Square Coupler"

"Circular Coupler"
Early print of the coupler attached to a Zp with operating door.
Di, with the brass nz120 coupler has functioned without flaw. 
 
at
Labels:

2 comments:

  1. Anonymous7 December 2014 at 15:31

    So why weren't these able to be printed in brass when ordered from Shapeways ?

    ReplyDelete
  2. Lewis Holden11 December 2014 at 09:20

    You're able to order them now (in brass and bronze).

    Will get some with my next order... I may have to make a knuckle compatibility coupler too :-)

    BTW Peter my website URL has changed (nzr120.blogspot.co.nz)

    ReplyDelete

Subscribe to: Post Comments (Atom)

18v Battery Power

I recently saw a post about 18v Battery Power being used on model trains as a source of motive power, the sort you might use on a drill or a...

  • NZR Locomotive Shells for HO 1:87
    Going some what off tangent in terms of scale, some New Zealand Locomotive Shells for HO were requested. The DC, DH, DI, DB, eeDF, DL, DXR ...
  • NZR DX (General Electric U26C)
    After many delays & other locomotive projects getting in the way the DX in its original form gets priority. This time things are differ...
  • 1:24 3D Printed GE U10b (NZR Dh class)
    1:24 3D Printed GE U10b Dh class. Pre-shunters refuge and painted as she came out new. Unsure of her number yet, will have to find out whic...